The Next Generation In Roof Coating Technology
TileFlex is no ordinary paint. This revolutionary coating combines advanced technology developed exclusively by Nutech Paint over more than 40 years with the special properties of surface cleaning Nano Technology to deliver superior performance.
Nutech Paint have spent years developing TileFlex roof coating, which will stay cleaner and retain gloss longer than any conventional acrylic roof coating.
Independent CSIRO1 testing has conclusively shown that the surface friction of TileFlex is substantially reduced by the unique properties of surface cleaning Nano Technology. Special polymers used in the manufacture of TileFlex and a low level of surface friction enables the coating to repel moisture, dirt and contamination. This will greatly improve the appearance and function of your roof.
Further testing has shown that TileFlex has superior gloss, early water resistance and film drying speed compared to other acrylic coatings enhancing appearance and application properties. TileFlex provides significantly more gloss on application and will maintain an attractive new looking roof appearance better than any other acrylic roof coating.
To reduce the damaging effects of the harsh Australian environment, Nutech has used the latest technology to impregnate TileFlex with surface cleaning Nano Technology. This innovation guarantees that TileFlex sets new standards in roof coating performance, maximizing the durability and total waterproof protection.
Protect Your Roof with TileFlex
There are two important reasons why you should restore your roof. Firstly, the appearance of your home is greatly improved with a clean glossy coloured roof.
Secondly, and more importantly, a durable coating protects your roof from the effects of ageing. All exterior surfaces and coatings undergo an ageing process caused by moisture, UV light radiation, temperature extremes, dirt, pollution, moss, lichen and bacteria. This ageing can result in gloss reduction, chalking, discolouration, blistering, flaking, loss of adhesion, and unsightly moss and lichen build up resulting in general coating failure.
The key to the success of TileFlex is its amazing ability to resist the causes of ageing better than any other acrylic roof coating. TileFlex uses a unique system of surface cleaning Nano Technology to repel dirt pick up and contamination.
TileFlex contains highly effective polymer preservatives which provide long lasting broad spectrum, algaecide and fungicide protection to prevent polymer discolouration and deterioration and moss and lichen growth. Unlike many other roof coatings, TileFlex is also user friendly because it does not contain environmentally harmful formaldehyde preservatives.
TileFlex is suitable for the collection of drinking water.
TileFlex contains UV resistant non-fading pigments and tough flexible 100% acrylic polymers which will transform any roof into an attractive and functional surface. TileFlex is guaranteed not to peel, fade or crack subject to correct surface preparation and application.
With TileFlex you can be confident that you will obtain “a perfect finish” every time.
- Next Generation in Roof Coating
- Contains NANO Technology to repel dirt and retain gloss
- Superior longer lasting gloss finish
- Contains polymer preservatives to provide algae and fungus protection
- Ultraviolet resistant pigments
|Shelf Life||12 Months|
|Film Forming Temperature||10°C|
|Dry Film Thickness||200 microns|
|Dry Film Thickness||10°C|
|Application Rate||2 coats @ 4m2 per litre|
|Drying time @ 77 degrees/td>||Touch dry @ 20 minutes|
|Recoat Time||1 hour. New pointing must be cured|
|Application Temperature||57-86 degrees|
|Dry Appearance||High Gloss|
|Application||Brush, roll or spray|